User's Manual

﹡TK (Top Key)

Programmable function key.

﹡Channel Selector Knob

Rotate the knob to select a desired channel.

﹡Radio On-Off/Volume Control Knob

Rotate the knob clockwise to turn the radio on, and rotate the knob fully counter-clockwise until a click is heard to turn the

radio off.

Turn the knob clockwise to increase the volume, or counter-clockwise to decrease the volume.

﹡LED Indicator

Status LED Indications and Tones

Source radio: Turn the radio on while

holding down PTT and SK2.

Target radio: Rotate the Radio On-Off

knob clockwise to turn the radio on.

The orange LED flashes twice.

Source radio: turn on the target radio

and connect the cloning cable. Then

press the PTT on the source radio to

initiate cloning.

1. LED solidly glows red when

cloning is in progress;

2. LED goes out when cloning is

completed;

3. LED flashes red when cloning

fails.

Wired Clone

Target radio

1. LED solidly glows green when

cloning is in progress;

2. LED goes out when cloning is

completed.

Power On The green LED flashes once.

Low Battery Alert Three beeps are heard.

Transmitting LED glows red.

Receiving LED glows green when carrier

presents.

Scanning Red LED flashes once every 1

second. The green LED flashes when