User's Manual

57
2. Release the Monitor key to exit.
3. There is only one monitor mode (carrier monitor).
Scrambler
Press the key programmed as Scrambler to prevent the third party eavesdropping your communication. The LCD displays
“Scrambler On”.
Press the key again to disable the Scrambler feature. The LCD displays “Scrambler Off”.
The Scrambler status will not be memorized once the radio is off and back on.
Scrambler Backup
Press the key programmed as Scrambler to prevent the third party eavesdropping your communication. The LCD displays
“Scrambler On”.
Press the key again to disable the Scrambler feature. The LCD displays “Scrambler Off”.
The Scrambler status will be memorized after the radio is off and back on.
Squelch Off
z Squelch Off
Press the key programmed as Squelch Off to open squelch with icon on the LCD. Press the key again to exit.
z Squelch Off Momentary
Press the key programmed as Squelch Off to open squelch with icon
on the LCD. Release the key again to exit.
Talk Around
Press the key programmed as Talk Around to enable the Talk Around feature. The LCD displays “TalkAround On”. When
enabled, the Rx frequency is used in place of the Tx frequency when transmitting, and the decoding CTCSS/CDCSS is used
in place of encoding CTCSS/CDCSS.
Press the key again to disable the feature. The LCD displays “TalkAround Off”.
Power Select
Each channel is preset with different power levels.
The radio can operate at high power when further distance is required, or at low level to save battery.
Press the key programmed as Power Select to select and save high/low power. The LCD displays icon
.