User's Manual

34
1～25 digit short data can be sent between portable radios.
+3, 5 or 8 digit ID number+ +1～25 digit number +
#
or PTT
5) Include Call
After a call is established, enter 3, 5 or 8 digit ID number +
#
Hang Up: Press
C
or the Disconnect key
6) RQQ Status Message
The status message is a code used to transfer the preset information and needs system support. For example, status “08”
indicates “on mission”. Preset the English information with 16 English characters through programming.
+3, 5 or 8 digit ID number + + 2-digit number among 00～31+
#
(32 statuses can be defined in all)
7) Emergency: Use the Emergency key.
8) PFIX Manually Grouped into Temporary Grouping
This feature can enable the radio to join the temporary grouping when roaming.
Rotate the Work Group Selector to the specified temporary group and then enter
+ 3-digit PFIX +
#
The 3-digit PFIX is a number among 200～327 specified by MPT1343.
9) Special ID Calling
Note: The Temporary Grouping feature can only be used within the local system, because MPT1327 and the police
use standard does not specify PFIX in temporary grouping signaling. Ease of use, this feature is ideal for policemen
on mission in other areas.
Note: Calls made by the special function key are emergency calls. When this function is used, the radio must have
emergency call right.