User's Manual

28
In trunking mode, icons displayed on the LCD are as follows:
Icons and Indications
Signal
Strength
Status
Message
Battery
Strength
Call
Forward
Speaker
Unmute
Transmit
Power
Transmit Lock Scan Roam
Scrambler
Man Down
Missed
Call
Whisper Vibrate
Signal Tone
The radio provides a series of audible tones which can tell the operating status of the radio along with the LCD display.
Signal tones include high-pitched and low-pitched tones. The operating statuses are indicated by changes in alert time,
sequence and interval.
When being called, the radio will continuously sound an alert tone until the PTT key is pressed.
High-pitched Tone
Low-pitched Tone
Signal Tone Indication
Note: After the individual call is connected, the called radio rings continuously and displays the number of the calling
party simultaneously. After the PTT key is pressed, the radio stops ringing. The communication time, which starts upon
the radio’s ringing, is displayed.
Note: A different, rapid beep tone is employed for Low Battery Alert.