User's Manual

20
Press to enter the lower level menu, or to confirm one item in the menu. When icon appears, press the key to view
missed calls.
3. Exit Key
C
Press
C
to clear the error prompt on the LCD in case of call failure. Each press of
C
will clear the last digit of a
wrong number. Long press
C
to return to the main menu directly.
In addition,
C
is the hang up key for all successful calls.
4. Redial Key
Hold down the Redial key just below , and the last dialled number appears. Press it again to make a call. Or press the
PTT key or
#
to make the call.
5. Call Back Key
Hold down the Call Back key below
C
, and the last caller number appears. Press it again to make a call. Or press the
PTT key or
#
to make the call.
6. Numeric Key
Each digit appears on the LCD as it is entered. Press
C
to clear when a wrong digit is entered.
7. Each valid press of the numeric key is followed by an alert tone.
8. The programmable function keys SK1, SK2 and TK can be programmed as the Manual Hunt key via the programming
software.
When the base station, which the radio currently locks onto, can not provide good voice quality, press the Manual Hunt key
to scan again, in order to search a better base station.
If the Manual Hunt key is held down, scan starts from the current frequency and move downwards in the frequency table. If
the radio disconnects from the network, it will automatically scan from the start frequency in the frequency table, to ensure
Note: If the radio locates at the boundary of two adjacent systems, pressing the key may cause the radio to switch to
the other system. Pay attention to the current channel number and the roaming icon
on the LCD during
scanning.