User's Manual

TC-700 Software Specification
5
selected channel and press PTT, the radio data is all reset (All clone modes will be automatically
activated when All Reset is completed). Frequency settings are shown as follows:
Channel data is shown as follows:
Channel
RX Frequency
(MHZ)
TX Frequency
(MHZ)
Signaling Power
Channel
Spacing
1 RX1 TX1 None H 25KHZ
2 RX3 TX3 None H 25KHZ
3 RX5 TX5 None H 25KHZ
4 RX1 RX1 None LO 20KHZ
5 RX3 RX3 None LO 20KHZ
6 RX5 RX5 None LO 20KHZ
7 RX1 RX1 None LO 12.5KHZ
8 RX3 RX3 None LO 12.5KHZ
9 RX5 RX5 None LO 12.5KHZ
10 RX3 RX3 67HZ LO 25KHZ
11 RX3 RX3 254.1HZ LO 25KHZ
12 RX3 RX3 023 LO 25KHZ
13 RX3 RX3 754 LO 25KHZ
14 RX3 RX3 2-TONE LO 25KHZ
15 RX3 RX3 5-TONE LO 25KHZ
16 RX3 RX3 None LO 25KHZ