User's Manual

TC-700 Software Specification

Software Specification

Specification:

 Conventional Mode

1. Mechanical Knob (16 channels)

VHF:136～174MHz

UHF:400-470MHz, 450～520MHz

2. Channel Spacing: 25/20/12.5KHz (Wide/Medium/Narrow bandwidth compatible)

3. Step: 2.5/5/6.25KHz

4. LED Indicator: Red/Green

5. 3 Programmable Function Keys

6. CTCSS/CDCSS Encode & Decode

7. DTMF Encode

8. 2-Tone (2-Tone version) / 5-Tone (5-Tone version)

9. HDC2400

Encode & Decode

10. HDC1200 Encode & Decode

11. Squelch Mode:

1) Carrier

2) CDCSS/CTCSS

3) Optional Signalling

4) CTCSS/CDCSS AND 2-Tone/5-Tone/ HDC2400

/HDC1200

5) CTCSS/CDCSS OR 2-Tone/5-Tone/ HDC2400

/HDC1200

12. Scan

13. Time-Out-Timer (TOT)

14. Rent

15. Battery Save

16. Emergency

17. PTT ID

18. Busy Channel Lockout & Busy Tone Lockout

Description

1. User Mode

This mode is for normal operation.

2. All Reset Mode

Firstly ground the SELF point, and then turn the power on while holding down TK key for 2 seconds.

The radio enters all reset mode with green LED flashing twice. Turn the channel selector knob to the