User's Manual

22
be heard.
If one beep is heard, the Channel Annunciation will be enabled. Upon re-turn on radio, the
current channel number will be heard.
Please select the volume level as "1", when using an earpiece.
Auto Contact
When a group of radios are set with Auto Contact, the radio will automatically emit alert
tone if the user is out of communication range.
Auto Contact Temporary Delete
Press the programmed Auto Contact Temporary Delete key to temporarily delete the
selected ID from the current Auto Contact List.
TX Low Power Mode Enable
Press the programmed TX Low Power Mode Enable key, if one beep is heard, the TX Low
Power is enabled. If two beeps are heard, the TX Low Power is disabled.
TX Low Power Temporary Enable
Press the TX Low Power Temporary Enable key to transmit a contact signal for
determining the transmit power level.
Channel Lock
When the Channel Lock feature is activated, rotate the channel selector is invalid.
Patrol Event Select
After a patrol message is received, press the programmed Patrol Event Select key to
select an appropriate patrol event.
Transmit Confirm
Press the programmed Transmit Confirm key to transmit the selected patrol event to the
dispatcher.