User's Manual

17
Advanced Operations
The following functions are programmable by your dealer.
Call1/Call2
Press the programmed Call1/Call2 key to transmit the stored DTMF code, 2-Tone,
HDC1200 or HDC2400
TM
signalling.
Emergency
Press the programmed Emergency key to emit emergency alarm, or send ENI
(Emergency Number Identity) / background tone to a pre-defined person or the dispatcher
(selectable via programming software). You may long or short press the function key to
cancel the emergency procedure.
Lone Worker
The feature provides added security and safety for individuals who work remotely from
their team. Press the programmed function key to activate the Lone Worker feature, the
radio is set up to request a response from a user at regular intervals. Should a user not
press any key as response to a regular warning tone, then a defined emergency
procedure is activated.
The Lone Worker status will not be memorized once radio power off.
Lone Worker Backup
The feature provides added security and safety for individuals who work remotely from
their team. Press the programmed function key to activate the Lone Worker feature, the
radio is set up to request a response from a user at regular intervals. Should a user not
press any key as response to a regular warning tone, then a defined emergency
procedure is activated.
The Lone Worker status will be memorized after radio power off and on.
Man Down (optional)
Press the programmed function key to activate the Man Down mode, horizontally or
inversely position the radio will activate an alert tone, a defined emergency procedure is
activated if the radio is horizontally or inversely positioned for a certain length of time.
Place the radio vertically to cancel the emergency procedure.