User's Manual

16
z External Scrambler (optional)
z External Scrambler Backup (optional)
z Auto Contact
z Auto Contact Temporary Delete
z TX Low Power Mode Enable
z TX Low Power Temporary Enable
z Channel Lock
z Patrol Event Select
z Transmit Confirm
Basic Operations
1. Rotate the On-Off/Volume Control knob clockwise to turn the radio on, green LED
flashes once.
A beep is heard if alert tone is set by your dealer.
2. Press the programmed Monitor key or Squelch Off key to hear activities on the
current channel, then rotate the On-Off/Volume Control knob clockwise to adjust the
volume.
3. Rotate the Channel Selector knob to select a desired channel. If the Channel
Annunciation feature is enabled by your dealer, your radio will automatically report
the current channel number when the selector is positioned to a channel.
4. To transmit, press and hold down the PTT key, speak into the microphone at your
normal voice level.
Hold the radio about 2.5 to 5 centimeters away from your mouth.
5. Release the PTT key to receive.