User's Manual

14
Power On The green LED flashes once.
Low Battery Alert LED flashes red, and radio
sounds three beeps every 30
seconds.
Transmitting LED glows red
Receiving LED glows green when carrier
presents.
Scanning Green LED flashes once
every 1 second.
Programming Reading: LED glows red;
Writing: LED glows green.
Encoding (DTMF/PTT ID/2-Tone/HDC1200/HDC2400
TM
)
1) LED glows red while
transmitting;
2) LED glows orange when
transmission ends.
Decoding (2-Tone/HDC1200/HDC2400
TM
) Orange LED flashes after the
signalling is successfully
decoded.
Select Power Level 1W: One beep is heard;
2W: Two beeps are heard;
4W/5W: Three beeps are
heard.
Function Key Press One beep to enable, two
beeps to disable.
11. Accessory Jack
12. Battery Latch
13. Belt Clip
14. Accessory cover
15. Battery
16. Screw
17. Electrode Piece