User's Manual

24
Channel Announce Temporary Enable
When you press the preprogrammed Channel Announce Temporary Enable key, two
modes can be programmed:
Mode 1 (report the current channel number at the beginning)
● Two Beeps sound indicating that the Channel Announce feature is temporarily
inactivated; turn on the power again to activate this feature, the radio reports the
current channel number.
● A Beep sounds indicating that the Channel Announce feature is temporarily
activated; this feature remains activated even if the radio is powered on again.
Mode 2 (not report the current channel number at the beginning)
● Two Beeps sound indicating that the Channel Announce feature is temporarily
inactivated; this feature remains inactivated even if the radio is powered on again.
● A Beep sounds indicating that the Channel Announce feature is temporarily
activated; turn on the power again to inactivate this feature.
Channel Announce Enable
When you press the preprogrammed Channel Announce Enable key, two modes can be
programmed:
Mode 1
Two Beeps sound indicating that the Channel Announce feature is inactivated; the radio
won’t report the current channel number even if it is powered on again.
Mode 2
A Beep sounds and the radio reports the current number; the Channel Announce feature
remains activated even if the radio is powered on again.
Communication Range Alert