User's Manual

Charging the Battery

When radio LED flashes red and three Beeps sound within 30 seconds after the battery is

installed, that means battery power is low. Please charge the battery.

You are recommended to use HYT-approved, supplied charger; Charger LED will indicate

the charging status.

LED Status

Red LED glows Charging

Green LED glows Done

1. Plug the power cord into the adapter. (See Fig. 1)

Fig. 1

2. Plug the DC socket of adapter into the DC jack on back of the charger. (See Fig. 2)

Fig. 2

3. Insert the battery or the radio with battery into the charger cup. (See Fig. 3)

Fig. 3

4. Plug the AC socket of adapter into an AC outlet. (See Fig. 4)