User's Manual

Monitor

This feature is enabled/disabled by your dealer. In receive mode, press the

preprogrammed MONI key to monitor activities on the current channel. This operation is

especially useful for adjusting volume level or receiving a weak signal. The LED indicator

glows green in monitor mode.

Programmable Function Key

This key can be programmed as a shortcut to Monitor or High/Low Power feature, or set

inactive through the programming software. 3 types of key pressing can be defined:

● Short Press—quickly press and release the key within 1 second

● Long Press—press and hold the key for more than 1 second

● Press—press the key in any manner

High/Low Power

This feature is enabled/disabled by your dealer. In receive mode, press the

preprogrammed High/Low Power key to toggle between high and low power. Three beeps

alternating from high tone to low tone indicate that the transmit power is switched from

high to low; and three beeps alternating from low tone to high tone indicate that the

transmit power is switched from low to high.

Compatible Channel Bandwidth

The dealer can select wideband or narrowband channel bandwidth via PC programming

software.

2-Tone Encode & Decode

When 2-Tone signalling is set, press the function key while holding down the [PTT] key to

transmit the 2-Tone code. 2-Tone decode and CTCSS/DCS decode can be set to one of

the two signalling logics (“AND”/ “OR”) to achieve Selective Call feature (set by your

dealer). Parameter settings are made through PC programming software.