User's Manual

Phenomena Analysis Solution

You can not communicate You may have been too far away from the Move towards other members. And

with other members. group members. make sure that you are within the

communication range.

Irrelevant communications The radio may have not been set with Set your CTCSS/CDCSS signaling the

or noises are heard on the CTCSS/CDCSS. same as that of other members.

channel. (Go to the dealer for this programming.)

The noise is too loud. You may have been too far away from other Move towards other members, power

members. off your radio and then restore its

power.

You may have been at an unfavorable Move to an open and at area, and

position. For example, your communication restore the radio power.

may have been blocked by high buildings or

frustrated in the underground areas.

Troubleshooting

If the above solutions can not x your problems, or you may have some other troubles, please contact us or your local

dealer for more technical support.