User's Manual

Scan Stay

If a matching signal is detected on a Scan List member,

or the PTT or Monitor key is pressed, the radio will stay

on the channel. At this time, the LCD displays and

the corresponding channel number. When the scan

stays on a priority channel, “ ” (Priority Channel 1)

will appear on the LCD.

Talk Back

With this feature enabled, you can talk back on the

channel where scanning pauses.

Enabled: When the radio is staying on a scanned

channel, it transmits on the scanned channel;

when the radio is not staying on a scanned channel, it

transmits on a preset channel.

Disabled: During scanning, the radio transmits on the

preset channel.

Priority Scan

With this feature enabled, you can scan the most

frequently used channel so that information will not be

missed. These priority channels can be programmed by

your dealer via programming software. Please contact

your dealer for more information.

The radio supports only one priority channel. When

scan stays on a non-priority channel, the radio will keep

detecting activities on the priority channel. Once any

activity is detected, it will jump to the priority channel.

Advanced Operations

Note:

1. You can create one scan list for each channel and

32 channels at most can be included in the list.

2. During scanning, the radio will not respond to

operation of the following functions: Power Adjust,

Compandor, Scrambler, Whisper and Keypad

Mode.

3. To ensure fast scan speed, the frequency of

adjacent channel should not exceed 30MHz.