User's Manual

27
Priority Channel Scan
Suppose there is a scan list of 5 channels and CH2 is
prioritized as Priority Channel 1, the scan operation may
proceed in the following sequence, as shown in Figure 2.
Figure 2 Priority Scan Sequence
Scan On/Off
There are three ways to access Scan mode:
1. When the radio is in Standby mode, press the
programmed Scan key on the channel assigned
with a scan list.
2. Whe n Aut o Sc an i s e nabl ed f or t he c han n el
assigned with a scan list, the radio will start to scan
automatically when it switches to the channel.
3. Enter the main menu, select “Scan → On”, and
press to conrm.
There are seven ways to exit from Scan mode:
1. Press the programmed Scan key again during
scanning.
2. The radio will automatically exit from Scan mode
when switches to a channel with no scan list or with
Auto Scan off.
3. Enter the main menu, select “Scan → Off”, and
press to conrm.
4. Press the Call key to transmit.
5. Press the PTT to transmit (except PTT ID).
6. Start the Emergency function.
7. Turn the radio off.
Advanced Operations