User's Manual

26
4) Select Call: The LCD will display “Select Call
Received” with sound alert. Both the sound alert
and displayed text will automatically reset.
6. ACK (Acknowledge)
When the ACK feature is enabled, the radio will send
back a single tone to the calling party, after it receives
an individual call or group call.
Channel Scan
T he S ca n f e a t u r e en a b l e s a t w o - w a y r a d i o to
continuously scan each channel for activity. It can be
programmed by your dealer.
When entering Scan mode, the radio sounds an alert
tone (programmable), and then scan starts from the
current channel and goes in order of the channel
number. During scanning, the LCD displays with
green LED ashing. If any signal is received on a certain
channel with matching signaling, the radio will switch
to this channel for the conversation; meanwhile, green
LED solidly glows.
When exiting from Scan mode, the radio also sounds an
alert tone (programmable) and disappears.
No Priority Channel
Suppose there is a scan list of 6 channels and all
channels are non-prioritized, the normal scan operation
may proceed in the following sequence, as shown in
Figure 1.
Advanced Operations
Figure 1 Normal Scan Sequence