User's Manual

19
beeping until the PTT key is released.
Your dealer can program a pre-alert function to warn you of the TOT expiration in
advance.
Battery Strength Indicator
When you intend to know the battery strength, press the programmed Battery Strength
Indication key to illuminate the Status Indicator and learn the battery strength by different
colors. To exit this function, release the key.
Status Indicator of different colors represents different battery strength levels. Refer to the
table below:
Battery Strength Status Indication
70% - 100% Solidly glows green.
50% - 70% Solidly glows orange.
30% - 50% Solidly glows red.
10% - 30%
There is no indication upon press of the programmed Battery
Strength Indication key. However, the indicator keeps flashing
red in operation status.
Less than 10%
There is no indication upon press of the programmed Battery
Strength Indication key. However, the indicator keeps flashing
red in standby status and keeps sounding a low-pitched tone at an
interval of 10 seconds. If you press PTT at this time, the radio will
sound an alarm sound to warn you of the transmission inhibition.
Monitor
z Squelch Off
Purpose: In this mode, the speaker is unmuted in any condition so as to receive any
sound on the current channel. When audio signal is received on the channel, audio will be
heard. Otherwise, background noise will be heard.