User's Manual

Figure 6

Removing the Belt Clip

Use a screwdriver to loosen the screws and remove the belt clip.

Note: Please be careful to avoid missing of screws.

Attaching/Removing the External Earpiece/Mini USB Device

Attaching the External Earpiece

Loosen the strap (①), and tie it to the strap hole (②). Uncover the accessory jack cover

(③), and insert the earpiece plug into the jack (④). Then rotate the other end of the strap

into the connector of the earpiece cable (⑤). If you want to adjust the connector’s position,

please hold the connector and draw the cable to avoid cable damage (⑥).

Figure 7

Removing the External Earpiece

Take converse steps to remove the external earpiece.