User's Manual

10
Please follow steps below to charge the radio/battery with a desktop charger:
1. Plug the AC connector of the switching power into an AC outlet socket.
2. Plug the Mini USB connector of the switching power into the Mini USB port on back of
the desktop charger.
3. Place the radio with the battery attached, or the battery alone, into the charger.
4. Make sure that the battery is in good contact with charging pieces of the desktop
charger. The charging process begins when the charger LED glows orange.
5. When charging is completed, the charger LED glows green. At this time, you may
remove the radio.
Status Charger LED
Charging Solidly glows orange
Fully charged Solidly glows green
You can also use HYT Six-Unit Switching Power to charge up to six radios/batteries
simultaneously, as shown in Figure 1. Please refer to the Owner’s Manual for Six-Unit
Switching Power for detailed operation procedures.