User's Manual

self-discharge.

Charging the Battery

With a battery-attached radio, when the Status Indicator flashes red, and an alert tone

sounds at an interval of ten seconds indicating the battery power runs low, please charge

the battery immediately. Only use the charger specified by HYT. The Charge Indicator will

indicate the charging progress as follows:

Please follow steps below to charge the radio with switching power:

1. Plug the AC connector of the switching power into an AC outlet socket.

2. Plug the Mini USB connector of the switching power into the Mini USB port at one side

of the radio unit.

3. Make sure that the battery is in good contact with the switching power. The charging

process begins when the Charge Indicator at one side of the radio unit glows orange.

4. When charging is completed, the Charge Indicator glows green. At this time, you may

remove the radio.

Status Charge Indicator of the Radio

Charging Solidly glows orange

Fully charged Solidly glows green