User's Manual

radio and the radio is in receiving status.

CTCSS/CDCSS

CTCSS/CDCSS is transmitted along with the

carrier and at a sub-audible frequency. The Tx

CTCSS/CDCSS of the transmitting party must

match the Rx CTCSS/CDCSS of the receiving

party, for the receiver to unmute speaker and output

audio.

Battery Save

This function can save battery power and prolong

radio operation time. Once no activity on the

channel and no operation performed, the radio shall

be on and off alternately.

Time-out Timer (TOT)

Limits the amount of time the radio user can

continuously transmit on a channel. This can also

protect your radio from damage due to excessive

transmission.

Squelch

Eliminates noise from the radio’s speaker. If the

incoming signal is not strong enough to produce a

clear transmission, then it should not be heard. This

helps to filter out unwanted noise. If the incoming

signal strength satisfies the squelch threshold, the

radio shall open squelch and unmute its speaker.

Squelch Off

Always unmute speaker to receive audio as well as

background noise.

Monitor

Carrier condition must be satisfied for the radio to

unmute to an incoming call, regardless of

CTCSS/CDCSS condition.

Momentary

Holds down a function key to activate the status,

and release it to exit. Non-momentary: Press a

function key to activate the status, and press it