User's Manual

27
Enable you to constantly monitor & keep an update on the activities on the most
commonly used channel so that messages will not be missed. Your dealer may program
priority channel via the programming software. Check with your dealer for details.
When scanning remains on a non-priority channel, the radio continues to monitor activities
on the priority channel, and jumps to the priority channel if activity is detected.
Busy Channel Lockout (BCL)
Avoid interference with the users using the same channel by preventing transmission if
another talk group is already on the air. The radio will generate a continuous tone upon
PTT press if a transmission is not allowed. Release the PTT to cancel the tone.
Note: See Glossary for the definition of BCL
Low Battery Alert
Should the battery level run low, LED flashes red and a low-pitched tone sounds at every
ten seconds to alert users to recharge the battery.
VOX (Voice-Operated Transmit)
You can transmit hands free with the use of optional accessories. The radio will
automatically begin transmitting when you speak, and terminate transmitting when you
stop talking.
Before you can transmit hands free,
1. Select the PTT/VOX switch on the earpiece to VOX.
2. Plug the earpiece into the accessory jack of the radio.
3. Press the programmed VOX key to activate the VOX feature.
4. Two seconds later (green LED goes out and no audio is output from the speaker),
speaker into the earpiece microphone and your voice will be transmitted.
Operation Instruction:
1. Press the programmed VOX key to activate/disable the VOX feature, with
corresponding alert tone.
2. The VOX feature is disabled automatically after the radio is turned off or