User's Manual

26
Figure 2 Priority Scan Sequence
 Scan On/Off
You can enter scan mode through any of the following two methods:
(1) Key operation
Press the programmed Scan key to enter scan mode, provided that there’re no less than
2 members in the scan list.
(2) Auto
When Auto Scan is enabled for a channel, the radio shall automatically enter scan mode
when it is switched to this channel.
You can exit scan mode through any of the following three methods:
(1) Key operation
Press the programmed Scan key to exit scan mode.
(2) Auto
The radio automatically exits from scan mode when it is switched to another channel.
(3) Turn the radio off.
 Talk Back
Defines whether the user is able to PTT the radio and talk back on the channel on which
the radio currently stops.
When checked, if the radio stops on a channel, the radio user is able to PTT the radio and
talk back on that channel. If the radio does not stop on any channel, the user is able to
PTT the radio and talk back on the predefined channel.
 Priority Channel Scan