User's Manual

ManualsBrandsShenzhen Hysiry Technology ManualsElectrical EquipmentSmart led strip controller

Setting Smart Life App

1.Download the “Smart Life”APP from APP Store or

Google Play Market, or scan the QR code and install

the "Smart Life" for either iOS or Android.

2.Once downloaded, the app will ask you to register

your account.

4.Type verification code to complete registration.

3.Type your email,click to get verification code

verification code will be sent to your email.

- 10 -

Connect with mobile phone (Auto Scan)

1.Turn on the smart phone or device Bluetooth function

and ensure the smart phone or device network is ON.

3. Hold controller the button for 5secouds, ensure red

lights is now rapidly flashing (2 times per second).

4.Open the application, click "+" to select "Auto Scan

Mode", and then start to automatically scan products

that can be connected.

5. Once connected, the App will prompt the connection,

then click "Done".

2.Before connecting, please make sure your smart

phone or device is connecting with your home

Wi-Fi 2.4GHz successfully.

- 11 -

6. Now you can control the Smart LED Lighting through

Smart Life App.

User Manual

Smart LED Strip

WiFi 2.4GHz & Bluetooth

Connect with mobile phone (Add Manually)

4.Open App and click "+" to add manually

corresponding product.

3. Hold Light strip controller the button for 5secouds,

ensure red lights is fast blinking.

1.Turn on the smart phone or device bluetooth function

and ensure the smart phone or device network is ON.

2.Before connecting, please make sure your smart

phone or device is connecting with your home

Wi-Fi 2.4GHz successfully.

- 15 -

6. Once connected, the App will prompt the connection,

then click "Done".

5.Confirm Light strip is now rapidly flashing

(2 times per second).

Warranty description

This product has one-year warranty from the day after

signing. Please contact us if you have any questions

or issues.

- 21 -

Warm Tips

- 20 -

Please check whether the device is connected with

power and your phone is connected with Wi-Fi.

Check routers: If the router is dual-band router,

please select a 2.4GHz network to add device. You

also need to open the router broadcasting function.

Set up the wireless router: Set encryption method

as WPA2-PSK authorization type as AES, or set both

as auto. The Wireless mode cannot be only 5GHz.

Please name router Wi-Fi in English. In order to stay

strong Wi-Fi signal, please keep device and router

within a certain distance.

Check whether connected devices have reached the

Maximum number router connection. If so, please try

to turn off the Wi-Fi connection of some devices.

Make sure router wireless MAC filtering function

is enabled.

Remove the device from the filter list and make sure

that router is not prohibiting device from connection.

Make sure the entered password is correct when

adding a new device.

App for more operations, please refer to the

corresponding application tutorial.

Into the home page

Select the corresponding

product model pairing

- 16 -

- 13 -

Enter the Wifi password

The equipment connected

to the Internet

Start pairing Enter the Wifi password

- 17 -

Support 3rd Party Control

Type the edit menu

of the user panel.

1 Select the third-party

application to be operated.

- 19 -

Smart LED Lighting

Follow the instructions in the

tutorial to connect and use.

- 14 -

Distribution network

success

Smart LED Lighting

Jump to the user panel

The equipment connected

to the Internet

Distribution network

success

- 18 -

Smart LED Lighting

Into the home page

Select Auto Scan Mode

- 12 -

Smart LED Lighting

Utilisation of Controller box

Music: Short press to enter the music mode, you can

switch between 4 music modes.

Colour: Short press to switch 8 kinds of colorful colour

scene modes

On/off: Short press to turn on/off the led light bar.

Long press distribution network.

- 06 -

IR Remote Controller

40 KEY

1. LED brightness adjustment button(+).

2. LED brightness adjustment button(-).

3. Pause/Run button.

4. ON/OFF button.

RGB CONTROLLER

V+

RGB GREEN

BLUE WHITE

V-

JUMP3

QUICK SLOW FLASH AUTO

1234

2H 4H 8H

JUMP7 FADE3 FADE7 JUMP3

QUICK SLOW FLASH AUTO

JUMP7 FADE3 FADE7

5. LED color buttons(16 colors).

Static red/Static green/Static blue/Static white/

Static orange/Static light green/Static dark blue/

Static dark yellow/Static cyan/Static lyons blue/

Static yellow/Static light blue/Static purple/

Static light yellow/Static sky blue/Static brown.

3 4

- 07 -

6.Brightness button：25%, 50%, 75%, 100% from

top to bottom.

8. Timing function on/off lights: 1 hour, 2 hours,

4 hours, 8 hours.

7. 8 colorful modes

9. 4 music modes:

Pattern 1 : 7 color breathing gradients change with

music changes, music stops 7 color breathing

gradients continue;

Pattern 2: 7 color breathing changes, each color

breathing 2 gradients and changes with music

changes, music Stop breathing change of 7 colors;

Pattern 3: 7 color jump changes with music changes,

music stop color is still to the current color;

Pattern 4: 7 color flash changes with music changes,

music stops lights off.

- 08 -

Please pull out the transparent chip from the bottom

of the IR remote to ensure that the battery is powered

properly.

Pull out the

transparent chip.

Make sure the IR remote aims at the IR receiver within

the sensing distance. The angle of the IR receiver is 120

and the sensing distance is 5 meters. Please remotely

control within the sensing range.

- 09 -

- 05 -- 01 - - 02 - - 03 - - 04 -

Specifications

Color

Power supply

Input voltage

Control method

Working temperature

RGB

AC 110-240V

DC 12V

WiFi 2.4GHz & Bluetooth /

Remote / Control box

-25℃-60℃

Dimmable,16Million Color, Music Sync Works with Alexa

/Google Home APP Control, Remote control,Local control.

Works on a variety of smooth surface without dust, like

walls, wood, metal, glass, and etc High-bond sticky

double-sided adhesive, fixing the LED strips.

Please note that all colorful light

strings cannot be DIY cut !

3.Use alcohol pad to clean dust.

Alcohol Pad

75% Ethyl Alcohol

For Disinfection Use

Alcohol Pad

75% Ethyl Alcohol

For Disinfection Use

2.Fix the adapter in the right way.

+12V +12V

4.Tear the plasticsheets bit by bit.

+12V

6.Reinfore the strip by clips.

+12V +12V

5.Stick the LED strip and press with force.

+12V

+12V +12V

+12V

LED Strip Lights

with one output

IR Remote Controller

PACKAGE CONTENTS

1 2

IR Receiver3

Anchor5

Alcohol Pad

75% Ethyl Alcohol

For Disinfection Use

Alcohol pad6

Power Supply

Key Points Of Installation

1.Stick the LED strip on suitable suitable surface.

Knitted / Wool fabrics Dusty wall

Rough plastic surface Frosted glass

RGB CONTROLLER

V+

RGB GREEN

BLUE WHITE

V-

JUMP3

QUICK SLOW FLASH AUTO

1234

2H 4H 8H

JUMP7 FADE3 FADE7

7.Press the whole LED strip repeatedly.

+12

Use the IR remote to turn on and operate the lights

+12

RGB CONTROLLER

V+

RGB GREEN

BLUE WHITE

V-

JUMP3

QUICK SLOW FLASH AUTO

1234

2H 4H 8H

JUMP7 FADE3 FADE7

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) this device may not

cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause

undesired operation. Any changes or modifications not

expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that

interference will not occur in a particular installation.If this

equipment does cause harmful interference to radio or

television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for

help.To maintain compliance with FCC’s RF Exposure guidelines,

This equipment should be installed and operated with minimum

distance between 20cm the radiator your body: Use only the

supplied antenna.