User manual

Shenzhen Hyking Industrial Co., Ltd HK-DVR User Manual
 Time information column: To display current time .
 Space information button: To display current remained space of each hard disk.
 Log button: To view the system log.
 User management button: The entrance of user management module.
 Voice listening button: Non-listening status
, Listing status with the function the user
can perform the real-time listening to the voice of current channel.
 Operation locking button: Unlock status
, Locked status . Any operation will be
prohibited while the locked status was activated. The user should firstly enter the username and
password to unlock the system, and then the operation will be available.
 Latest adding function button: >>, click this button to view the latest adding function for each
upgraded version.
System Setting
Firstly the user should select the video channel that need to be set, and then click the button on
the main interface of system. If there is a channel in the status of record/alert, or the whole network
users is connecting to the system, a message box will pop-up to prompt the user: The data will
suffering harm or loss if the user enter the system setting now, which shown as below:
At this time, the user can leave the auto-button at the position of
status. Click
button to shutdown all the recording or alerting. If the user enters the system setting screen in normal,
click the Apply button to take the setting into effect immediately. At last, click the OK button to quit
the system-setting screen. Click Cancel button to quit without save the change.
Web: www.kingcctv.com
E-mail: [e-mail] Page 8 of 8