User manual

Shenzhen Hyking Industrial Co., Ltd HK-DVR User Manual
 [Slow]: set the current channel in the status of slow playing. This playing mode has three levels.
Each time click the button the speed of playing will be slower. If you want switch back to the
normal status, please click the [Fast] button.
 [Fast]: set the current channel in the status of fast playing. It is the reverse operation of[Slow].
This playing mode has three levels. Each time click the button the speed of playing will be faster.
If you want switch back to the normal status, please click the[Slow]button.
 [To the end of the file]: change the position of current channel that hop from the playing video
file to the end place. Note: the processing for first channel of playback is a little different from
other channels. The processing for first channel is more exact.
 [Snap frame]: snap a image from the video that playing in the current channel and save to the
system specified folder as a bitmap picture. The user can find out this image by search the logic
in the playback screen
 [Full screen]: set the video playing section to fill up the entire screen, thus the user can view the
image in a larger section.
 [Switch of repeat]: start or end the repeating play. This function is only available for the first
channel.
 [Starting point of repeat]: this button is taking into effect while the repeat playing started. Click
to select the starting point of repeat. This function is only available for the first channel.
 [Ending point of repeat]: this button is taking into effect while the repeat playing started. Click to
select the ending point of repeat. This function is only available for the first channel.
 [Save the data of repeated recording]: this button is take into effect while the starting point of
repeat and the ending point of repeat have been selected. Click this button, then the dialog box
for save the file name will pop-up. Enter the correct file name in the dialog box and then save it
in background. At the same time, in the status bar will display the current progress of saving.
Usually, this function can be used to intercept an important period from a long time recording
packet. This function is only available for the first channel.
 [Turn on the volume]: click to turn on the volume of the currently playback channel.
 [Adjust the volume]: move the slide bar from left to right the volume will increase gradually. If
you want to eliminate the voice, move the slide bar to the left end.
2. Set the maximum numbers of playback channel:
According to the supporting capability of hardware to set the total number of playback channel. Select
the menu [File]->[Setting], a dialog box as below will pop-up. Click the OK button after set the
correct number. At the present time, the maximum number of the channel that the system supported to
play the recording file at the same time is 16 channels.
Web: www.kingcctv.com
E-mail: [e-mail] Page 52 of 52