User manual

Shenzhen Hyking Industrial Co., Ltd HK-DVR User Manual
Snap the Image
Select the channel that need to snap the image as the current channel, and then click the
button on the main screen of system to snap an image and save to the corresponding directory. To
search this image, enter the playback screen and find out at the Snap Frame in Preview Image of a
channel, which is according to the snapping date and time.
Start and Shutdown Recording
1. For the single channel: on the main screen the preview button for single channel has two statuses,
which are recording stop
and recording start , click the button to switch. Note: the preview
will be activated while the recording is starting.
2. Simple operation: click
button to start all channels, and click button to close all
channels immediately.
Operation of Rotating Platform
Firstly select a video channel, which is shown as below:
To control the rotating platform of host channel that corresponds to the current channel:
1. The center lock button using to lock the buttons that the client use to control the rotating platform,
which is unavailable to host.
2. Control the rotating platform: according to the direction that the arrowhead indicated.
 Up: roll up the rotating platform;
 Down: roll down the rotating platform;
 Left: roll the rotating platform to left;
 Right: roll the rotating platform to right;
 Upper left: roll the rotating platform to upper left.
 Upper right: roll the rotating platform to upper right;
 Lower left: roll the rotating platform to lower left;
Web: www.kingcctv.com
E-mail: [e-mail] Page 47 of 47