User manual

Shenzhen Hyking Industrial Co., Ltd HK-DVR User Manual
the figure below:
1. Single channel switch: set the parameter of input and output, and then click the switch button.
2. Auto switch the grouping: set the grouping and the subordinate options, and then click the auto
switch button.
3. Switch to single group: click the switching button of single group after specified a group. As the
figure shown that it is going to switch to group a.
Set the Preset Point of Speed Dome
Figure of the interface: the status of each channel can be set as working or idle. If the user won’t use
the speed dome, please uncheck the option [Start up] to reduce the cost of system resources.
Web: www.kingcctv.com
E-mail: [e-mail] Page 38 of 38