User manual

Shenzhen Hyking Industrial Co., Ltd HK-DVR User Manual
Snap the Image
Select the channel that need to snap the image as the current channel, and then click the
button on the main screen of system to snap a image and save to the corresponding directory. To
search this image, enter the playback screen and find out at the Snap Frame in Preview Image of a
channel, which is according to the snapping date and time.
Start and Shutdown Recording
Method 1: Operating in single channel: Select the channel of audio & video source that need to be
operated, and then click the recording button
, which is at the selecting section of audio & video
source. Highlight the button as
, then this channel start the recording. Click the button again to
switch back to
, then the recording halt.
Method 2: Operating in multiple channels with simple operation: Click the
button on the
main screen of system, and then all the channels start for recording. To stop the recording or alerting
for all channels, click the
button.
Note: After the working list of auto recording has been set, just click the
button once to
switch to the status of
, the system will start immediately according the pre-setting. Since
then, the only operation for user is to click the quit button of main program
Operation of Rotating Platform
Firstly select a video channel, and then click the section of rotating platform at the bottom of right part,
the panel of rotating platform will appear. Shown as below:
The available operation for the panel of rotating platform listed as below:
1. The lock button in the center for lock the buttons, which control the rotating platform and lens;
2. Control the rotating platform: according to the direction that the arrowhead indicated.
 Up: roll up the rotating platform;
Web: www.kingcctv.com
E-mail: [e-mail] Page 23 of 23