User manual

Shenzhen Hyking Industrial Co., Ltd HK-DVR User Manual
In the input column enter the address of rotating platform according to the setting of the
decoder’s jumper. Each channel corresponds to a decoder, and the address column corresponds to
the address of decoder. Some of the advanced decoder, such as the Samsung Speed dome has the
own address of speed dome, so the user needs to set the address of speed dome. Note: While the
alert box is in use, please avoid the conflict from the serial port between the alert box and the
decoder of rotating platform decoder.
Network
Enter the [Network] menu in the system-setting screen, and then the interface to define the parameter
of network will appear:
1. Transmit mode:
Means the mode to transmit the data to the networking client through the channel that specified by the
server. The modes that the host can set are Broad Band (0) / Telephone Line (1) / Telephone Line
with Audio (2) / High Quality Single Frame (3) / High Quality Single Frame with Audio (4),
which extend the content of network. Among these modes, the high quality single frame mode is able
to transmit a high quality frame per second, and the user can determine whether the audio in use.
Please note:
 Only the mode of telephone line/telephone line with audio will influence host about the
quality of recording while connect to the network. The other modes won’t influence the host
(include definition, frame rate, etc).
Web: www.kingcctv.com
E-mail: [e-mail] Page 20 of 20