User manual

Shenzhen Hyking Industrial Co., Ltd HK-DVR User Manual
Important Note:
After the recording parameter of the channels on the sever end has been set, the system will transmit
the configured quality about video data of this channel to the client immediately once a network client
connected to any channel. Unless the transmit mode that in the network option of the server has been
set as through the telephone line. Thus, this setting directly influenced the receiving effect for the
network end.
Alert
Enter the system-setting screen, select [Alert] menu. To set each of the parameter by adjust the options
in the [alert] menu, which is shown as below:
General
1. Detection of lost video: Check this option to turn on the sound alerting and the log recording
while the system detect that there is no video signal input. The specific sound for alert
corresponding to the wave file that the user selected.
2. Send to telephone: means whether the generated alert signal should be connect to the telephone
line Modem and awake the remote client with the sending of audio & video signal. Here the
number indicates the remote telephone number, and the IP indicates the IP address of the
corresponding client that the remote client set to connect and transmit. If this function has been
Web: www.kingcctv.com
E-mail: [e-mail] Page 13 of 13