Installation Guide

3、Click "scan" in the upper right corner after registration and login.。
4、Scan the qr code on the product package and immediately complete the
networking (note: smart host needs to be added to the home for successful
networking)。
Long press the reset button for more than 5 seconds to reset.
五、product parameters
Product size：83*83*43（mm）
power supply mode：CR123A lithium battery
Communication protocol：ZigBee HA
Wireless standards：IEEE 802.15.4（2.4GHz）
The communication rate：250Kbps
Standby power：2.5uA
Working humidity：5%~85% no condensation
Working temperature：-10℃—50℃
Transmission distance：100M（open environment）
六、Matters needing attention
1、Before installation, the product should be stored in a dustproof, moisture-proof
and mildew-proof environment.
2. Slight fever occurs during the use of this product, which is a normal
phenomenon.
3. The default indicator light before entering the network is red.
4, after the completion of the network indicator light default: colorless.
5. Please handle the product with care during installation to avoid scratching and
damaging the surface of the product and affecting the appearance.
6. Remember, live installation is prohibited.
七、Technical support
1、 Shenzhen Hwellyi Technology Co. , Ltd，with retained ownership。
2、The contents of this document shall be provided according to the
manufacturing status of the product. If there is any update, no further notice will
be given.
3、If you need to know more about the product and update information, please
visit the official website of the product：www.hwellyi.com
4、For consultation, please call the service hotline of hua yi：400-0085-365
official WeChat ID：HWELLYI