Operating Instructions for the Pet Trainer CW-004 Please read these instructions carefully before use.
Functional diagram of the transmitter Antenna Light Function display Charging port Microphone Call Up Warning beep 频 道 选 择 Vibration Flashlight Down
Functional diagram of the receiver Speaker Collar holder Collar holder Charging port Channel selection Power button
Channel and charging indicator light Vibrating contacts Collar fastening buckle Product features: The product can achieve remote control up to 1,500 meters when used in open and unobstructed areas and can reach as far as 50 to 500 meters even when there are obstacles or walls. In addition to remotely-controlled vibration and beep, it also has an upgraded voice call function which enables you to send real-time voice commands to and recall your pet even if you cannot see where the pet is.
1. The unit comes with a built-in rechargeable battery, a charging port under a waterproof silica gel plug (as shown in the functional diagram), and a USB charging cable (the transmitter and the receiver share one charging cable). 2. The unit must be fully charged when used for the first time.
Warning beep icon: It shows up when the warning beep button is pressed. Ten levels of beep sound (00 is the invalid state) are selectable by pressing the “+” and “-” buttons. Level digital display icon: It shows up when the level of vibration or beep sound is adjusted. Operating instructions for the transmitter: Without a power button, the unit starts when any key is pressed and enters the sleep mode (power-off) automatically when there is no operation for five seconds. 1.
time, the receiver will keep vibrating. 5. Up and Down buttons: These two keys can be used to adjust the sounding and vibration frequencies of the beep and vibration buttons, with level 00 being the static mode, level 1 being the minimum level, and level 10 being the maximum level. 6. Flashlight button: This button is used to light up or turn off the headlight. Operating instructions for the receiver: 1.
pet suddenly cries out or feels panic, it may be caused by the high level of the vibration or beep sound. In this case, the vibration or beep sound shall be turned off or turned down immediately. 5. During the training process, please use language reward or food reward to cooperate with the training, so that you can quickly and accurately correct some improper habits and actions of the pet.
- English: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device.
-Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Specific Absorption Rate (SAR) information: This equipment complies with FCC/ISED radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance.