User's Manual Part 1

ֻӰ೨ሙǋྠిద

3.3 PREPARE THE 1-AXIS STABLE GIMBAL

PREPARE THE 1 AXIS STABLE GIMBAL

Features of the gimbal

Control accuracy ±0.03°

Control range

Pitch angle:+90°~~ -90°

Stabilized design

Rotate automatically when the X4 Pro tilted to

ensure stable shooting

3.3.1 INSTALL THE 1-AXIS GIMBAL

Step 1: Take out the 1-axis gimbal from the box, position and connect the vibration damper

with its mate.

Step 2: Insert the gimbal signal wire into the right slot.

Step 3: Insert the camera signal plug into the left slot.

After the installation, power on the X4 Pro on a level surface. The 1-axis gimbal will power on

and adjust automatically. The Transmitter's side rotary switch will control the gimbal rotation.



Gimbal signal wire



Camera image transmission wire

Ɣ$EQRUPDOJLPEDORSHUDWLRQFDQEHFDXVHGE\LQLWLDOL]LQJWKHSRZHURQDQXQOHYHOVXUIDFH

an impact, or from a crash. Put the X4 Pro on a level surface before powering on and flight.

Do not cause impact to, or immobilize the gimbal after it is powered on.

Ɣ)O\LQJLQIRJRUFORXGVZLOOFDXVHGHZIRUPDWLRQZKLFKFDQFDXVHIDXOW\JLPEDORSHUDWLRQ

The gimbal will operate normally again after it is dry.

3.3.2 GIMBAL INSPECTION AND ABNORMAL OPERATION









