User's Manual

5.1 FLIGHT ENVIRONMENT

(1) The flying area should be open and is without tall buildings, otherwise the GPS

may not work.

(2) Do not fly in bad weather like windy, snowy, rainy or foggy days.

(3)Stay away from obstacles, crowds, power cables, trees and water etc.

(4) Do not fly near the radio towers or airports.

(5) The quad will not work in the Antarctic Circle or the Arctic Circle.

(6) Obey the local laws and regulations, do not fly in restricted areas.

(7) Only fly in good weather conditions and air temperatures between 0-40℃

(not including rain, wind or other extreme weather.)

5. START TO FLY

High Tension Line RainInterferenceAirport

5.3 BINDING

The binding is completed in the factory.

For re-binding, press Photo button and power on the transmitter simultaneously until “Bind to

Plane” is displayed, then power on the drone and place it very close to the transmitter, the binding

process will be completed after one “ beep” sound.

If the binding failed, please power off the drone and repeat the above steps.

In case of any injuries caused by improper operations, it is advised that beginners learn to

operare the quad under the guidance of professional.It is very improtant to choose the

right flight environment.

5.2 SAFETY CHECK BEFORE FLIGHT

(1) Make sure the batteries are fully charged. (Quad,transmitter or smart device)

(2) Ma

ke sure propellers are installed properly.

(3) Inse

rt Micro-SD card for pictures and videos.

(4) Check if mo

tors work well after binding.