User's Manual

The transmitter will automatically find the best frequency to ensure a live video with good

quality of transmission. Please re-select the frequency from 573

5MHZ to 5841MHZ to get a

better video transmission when necessary.

Pull the throttle stick to the lowest position and press the Elevator stick for 1.5 second to enter

into the MAIN MENU interface. Push the Elevator stick up/down to select “5.8G Frequency”,

push the stick to the right to enter into the “ 5.8G frequency” interface, select a matched

frequency.

Mode 2: Push both sticks to the upper left corner and power on the transmitter simultaneously

until “Calibrate Stick Mode 2” displays on LCD, rotate both sticks in circles for three times, then

release both sticks, press any trim for 1.5 seconds until the LED on the transmitter turns into

solid green which indicates a successful calibration.

Mode 1: Push the left stick to the upper left corner and the right stick to the upper right corner

and power on the transmitter simultaneously until “Calibrate Stick Mode 1” displays on LCD,

rotate both sticks in circles for three times, then release both sticks, press any trim for 1.5

seconds until the LED on the transmitter turns into solid green which indicates a successful

calibration.

5.8G FREQUENCY

0:08:49

Exit

5735MHZ

0:08:49

MAIN MENU

Set Reverse

Set Sensitivity

5.8G Frequency

Set Manual

Fly When no GPS

Show Version

Exit

8. TRANSMITTER CALIBRATION

9. FREQUENCY SELECTABLE 5.8GHZ

The transmitter mode can be shifted according to the above operation.