User's Manual

7.2 INSTALL THE TX BATTERY

7.3 REVERSING CHANNEL SETUP

If you would like to reverse any of the stick functions due to personal preference then follow

the instructions below. Be aware that it will change the controls back to front.

Pull the throttle stick to the lowest position and long press the Pitch stick simultaneously to

enter into MAIN MENU interface. Push the Elevator stick up/down to select “Set Reverse”.

Select “Exit” to exit.

7.4 SENSITIVITY SETUP

If you would like to change the sensitivity of any of the stick functions then follow the

instructions below.

Pull the throttle stick to the lowest position and long press the Elevator stick to enter into the

MAIN MENU interface. Push the Elevator stick up/down to select “Set Sensitivity”, push the

stick right to enter into the “ set sensitivity” interface, select “Expert mode” or “ Normal

mode”.

Select” Exit” to exit.

0:08:49

SET REVERSE

NormalRudder

Aileron Normal

Normal

Exit

Elevator

0:08:49

MAIN MENU

Set Reverse

Set Sensitivity

5.8G Frequency

Set Manual

Fly When no GPS

Show Version

Exit

● Do not mix old and new batteries ● Do not mix different types of batteries

● Do not charge non-rechargeable battery.

Close the cover

Remove the cover

Install 4 x AA batteries

according to the correct polarities

PUSH PUSH