User's Manual

: Tap the thumbnail window to enter into map interface.

【14】Map Thumbnail Window

12.3 WAYPOINT MODE

【1】Waypoint Mode

: Click the icon to set up user location as the center point of map.

Waypoint mode can be activated/deactivated in the map interface, which allows user to define

waypoints and make the quoadcopter to fly according to the user defined waypoints.

: Click the icon, the quadcopter will fly according to waypoints.

Click the icon again, it will shift to , and exit waypoint mode.

【3】History

: Click the icon to check flight record.

【2】Waypoint Setup

: Tap the icon to set the flight path.

: Tap the icon to set waypoint, and the flight path will be composed of waypoints in sequence.

: Tap the icon to delete all waypoint data.

: Tap the icon and then click one waypoint, you can detele it.

: Tap the icon to set the nose direction.

: Tap the icon to submit waypoint data to quadcopter.

【4】Map Center

: Click the icon to set up user location as the center point of map.

: Tap the icon, then long press the map to make calibration automatically.

【5】Map Mode

Normal Mode; Satellite Mode; Mixed Mode.

【6】Map Calibration

: Tap the thumbnail window to enter into camera interface.

【7】Camera Thumbnail Window

Make sure to submit waypoints data after finished.

History

Connected

Battery

capacity

History

【1】

【7】

【2】

【3】

【4】

【5】【6】