User's Manual

【1】HOME PAGE

: Click the icon to go back to home page.

: Display the longitude and latitude of the quadcopter.

: Display status of quadcopter and warnings. Quadcopter is connected when this

icon is in blue.

: Display the longitude and latitude of the control device.

: Display the current GPS signal.

Pitch: Pitch angle during flight.

Roll: Roll angle during flight.

Yaw: Yaw angle during filght.

Altitude: Vertical height from the ground.

Distance: Horizontal distance between quadcopter and control device.

Speed: Current flight speed.

【2】FLIGHT DATA

【3】X4 STATUS BAR

【4】GPS SINGAL

: Display the signal of FPV transmission.

【5】VIDEO SIGNAL

: Display the connection signal between quadcopter and control device.

【6】TRANSMITTER SIGNAL

: Display the quadcopter battery level. For safety, please land the quadcopter when the battery is low.

【7】POWER

: Click the icon to adjust flight settings according to personal preferences.

: Tap the icon to view pictures and videos.

: Tap the icon to take pictures and videos.

: Tap the icon to shift between picture mode and video mode.

【8】SETTINGS

: Click the icon to enter/exit headless mode.

【11】HEADLESS MODE

Default setup is stick mode, tap the screen, the sticks will show on the screen and use the

sticks to control quadcopter.

: Click the icon, it will shift to , and enter into waypoint mode. The tansmitter mode

is not available.

【10】TRANSMITTER MODE

【9】CAMERA

: Click the icon to turn on/off RTH mode.When RTH mode is activated, the quadcopter

will fly back to the takeoff point automatically.

【12】RETURN TO HOME

: Click the icon and slide the screen as instructed to arm the motors.

【13】ARM/DISARM MOTORS

After quadcopter took off, click the icon again and slide the screen as instructed to

disarm the motors and land the quadcopter.

Connected