User's Manual

13
©2016 Hubsan
8.1 INPUT KEY FUNCTION
MODE 2
S/N Mode/ Control Function
MODE 1
(1)
Throttle/Aileron Stick
Push the stick forward or backward and the quadcopter will
ascend or decend; Push the stick left or right and the quadcopter
will fly left or right.
Push the stick forward or backward and the quadcopter will
ascend or decend; Push the stick left or right and the quadcopter
will rotate counter clockwise or clockwise.
MODE 1
(2)
Elevator/Rudder Stick
Push the stick forward or backward and the quadcopter will fly
forward or backward;Push the stick left or right and the quadcopter
will rotate counter clockwise or clockwise.
Push the stick forward or backward and the quadcopter will fly
forward or backward;Push the stick left or right and the quadcopter
will fly left or right.
3 Aileron Trim Aileron trim adjusts for left and right drift.
4 Elevator Trim
Elevator trim adjusts for forward and backward drift.
5 Rudder Trim Rudder trim adjusts for drift of left and right rotation or yaw.
6
Throttle Trim
Throttle trim is normally at neutral.
Long press the lower throttle trim to turn on/off LED indicators
7 Power Switch Push to turn on the transmitter. Push again to turn off.
MODE 2
2
Elevator /Aileron Stick
1
Throttle/ Rudder Stick
8
13
10
Photo
9
Video
USB Plug
Video glasses socket
Press the photo button to shoot photos.
Press video button to start recording and press again to stop.
For upgrading the software
Connect Hubsan video glasses (The video glass is not included)
11
GPS SW
Push the switch up, the bulit-in GPS will calculate the quad
copter’s position and height and help to keep the quad copter in a
stable hover (ONLY FOR OUTDOORS)
12
RTH SW
Push the switch up, the quad copter will return to the home
point automatically ( ONLY FOR OUTDOORS)