User's Manual

4.2 Input Key Function
S/N Identication Function
1 Throttle/Rudder Stick
2 Elevator/Aileron Stick
Forward and backward movement of the stick makes the Air Plane nose
point up/down respectively. Left and right movement of the stick
makes the Air Plane roll left/right to initiate a turn.
(1) Throttle /Aileron stick
Forward and backward movement of the stick will make the Air Plane
increase or decrease speed respectively.Left and right movement
of the stick makes the Air Plane roll left/right to initiate a turn.
(2) Elevator/Rudder Stick
Forward and backward movement of the stick makes the Air Plane
nose point up/down respectively. Left and right movement of the
stick makes the Air Plane yaw left/right respectively.
3 Aileron Trim Aileron trim adjusts left and right roll.
4 Elevator Trim Elevator trim adjusts up and down movement.
5 Rudder Trim Rudder trim adjusts left and right yaw.
6 Throttle Trim Throttle trim adjusts speed of motor.
7 Power SW
Pushing the switch up powers on the transmitter, pulling it down
switches it o.
8 Neck Strap Eyelet
For the attachment of a neck strap which eases the tension of your
hands from holding the transmitter.
9
10
Antenna
SA
Transmits the 2.4Ghz wireless signal.
GPS function: Push SA, the plane will return to home; Pull SA, the RTH
function turns o.
11
12
SB/SC
SD
No function for now.
Control LED light bars under the wings: Push SD, the LED lights on;
Pull SD, the LED lights o.
13 DSC (Optional) Connects to the data cable of computer simulator.
Forward and backward movement of the stick will make the Air Plane
increase or decrease speed respectively.Left and right movement of the
stick makes the Air Plane yaw left/right respectively.
Hold down ENT key for 1 Second to enter setting status.
Press the ENT key to enter reverse setting status.
Move arrow to Stickmode with up/down key, push the left stick from up to down 3 times,
the Mode 2 will change to Mode 1 automatically, Press EXT key to conrm and exit, Power o/on
again and it will work as changed.
08 SPY HAWK
H301S
15 SPY HAWK
H301S
www.hubsan.comwww.hubsan.com
8.1 Mode 1 and Mode 2 Reversing setup
8. ADVANCE PERFORMANCE SET UP
a
a
a
b
b
1) Open the cover of transmitter by
unscrewing the 4 screws as picture
shows.
2) Screw a/b in the TX
b
3) Fasten the screw a on the Spring and the screw b on the Shrapnel, the stick will be Throttle Stick；
Loosen the screw a on the Spring and the screw b on the Shrapnel, the stick will be non Throttle
Stick .