User's Manual

5.1
Input Key Functio
5.2
Quadcopter Calibration
S/N
1
（2）
（1）
2
3
4
5
6
Mode 2
Mode 2
Elevator/ Aileron Stick
Mode 1
Throttle/ Aileron Stick
Mode 1
Elevator/ Rudder Stick
Elevator Trim
Aileron Trim
LED Indicator
Power Switch
Mode/ Control Function
Push the stick forward or backward and the quadcopter
will ascend or decend; Push thestick left or right and
the quadcopter will rotate left or right.
Push the stick forward or backward and the quadcopter
will flyforward or backward;Push the stick left or right
and the quadcopter will fly left or right.
Push the stick forward or backward and the quadcopter
will ascend or decend; Push the stick left or right and
the quadcopter will fly left or right
Push the stick forward or backward and the quadcopter
will fly forward or backward;Push the stick left or right
and the quadcopter will rotate left or right.
Adjusts for forward and backward drift.
Adjusts for left and right drift.
Blink in red before binding;
Remain lighted in green after binding.
Remain lighted in red when in expert mode
Turn on/off the remote controller.
● Do not mix old and new batteries ● Do not mix different types of batteries
● Do not charge non-rechargeable battery.
Quadcopter calibration is required when the quadcopter drifts during flight.
Land the quadcopter and place it on a horizontal surface for calibration.
5