User Manual

By capturing the best input signal you will be able to enjoy the maximum
coverage and best quality signal inside where your Indoor antennas are
located. The better the input signal, the better the output signal. In order to
find the best input signal, you want to place your outdoor antenna as high as
possible with the least amount of obstruction between the antenna and the
cellular base tower. A clear line of site is ideal.
Isolating the signal from the antennas is done by ensuring that the antennas
are not pointing to each other and by having enough distance or barrier
shielding in between them. The signals travel like rays of sunlight, a directional
antenna will send the signal in the direction that it is pointing. An omni
directional antenna will send the signal in every direction around it. So
depending on your equipment it’s important to be sure that your Indoor
antenna is not sending the signal back into the outdoor antenna.
THINGS TO CHECK WHEN EXPERIENCING WEAK CELLULAR SIGNAL
1. Ensure the outdoor antenna is pointing in the correct direction and is
capturing adequate signal for the booster.
A good input signal (the best you can find)
Isolating the outdoor (donor) antenna from the indoor
(server) antennas so they do not feedback into each
other.