User's Manual
your system is receiving a very poor quality signal (weak and
unusable signal), you can pointyour outdoorantennamore directly
towardsthecellulartowertoincreasethestrengthoftheinputsignal.
Sometimesthismayrequirecompletelyrepositioningtheantennato
alocationwhereyoucanachievealineof
sitetothetower.
2. Increase the separation between the outdoor antenna and the
indoor antenna. This can be achieved by increasing the distance
between the two antennas or by placing barriers between them,
suchasmovingtheindoorantennatoanadjacentroomwherethere
would be an additional
wall separating them from the outdoor
antenna.
3. Manual Gain Control. Adjust the gain with the manual gain control
functionusingthedipswitchesonthesideofthebooster.
7 FCCRFExposureStatement
ThisequipmentcomplieswithFCCradiationexposurelimitssetforthfor
an uncontrolled environment. End users must follow the specific
operating instruction for satisfying RF exposure compliance. This
transmittermustnotbeco‐locatedoroperatinginconjunctionwithany
otherantennaortransmitter.