User's Manual

indoorandoutdoorantennas.
2. Neverpointthefrontofthedonor(outdoor)antennatowardstheinside ofthe
server(outdoor)antenna.
3. Verify that the supplied coaxial cables from both the donor (outdoor) antenna
andtheserver(outdoor)antennaareproperlyconnectedtothecellularbooster
beforepoweringitup.

4. Carefullypluginthesuppliedpoweradaptorintothebackofthecellularbooster
whereitismarked‘power’andconnecttheotherendtoapoweroutlet.

TheLEDindicatormarkedpowershouldlightupgreen.
2.9 ChecktheCellularBoosterStatus
Your cellular booster comes equipped with electronic sensors designed
to identifycellular signaloverloadoroscillationwhichcan hindersignal
boosting performance. Your cellular booster is specially designed to
automaticallydecreasegaintocompensateforthesecircumstances.The
devicealsohasafeaturetoautomaticallyshutdownincaseofexcessive

oscillation. Improper equipment installation and unusable signal quality
can cause oscillation, this is why it is important to fully understand the
LEDalarmlightsonyourbooster,astheywillhelpyouidentifyandsolve
anypotentialissues.
ThecoloroftheLEDindicatesthestatusoftheboostersystem.
