User's Manual

OmniCeilingdirectionalantenna
Placeinthecenteroftheareawherethesignalneedstobeamplified.
Paneldirectionalantenna
Placeintheouterperimeteroftheareathesignalneedstobeamplified.
WhipOmnidirectionalantenna
Mountdirectlytotheconnectormarked“indoor”onthecellularbooster.
2.7 Installyourcellularbooster
Install the cellular booster in a location that is properly ventilated and
not exposed to excessive heat, moisture and/or direct sunlight. The
optimalareawouldbeonawalllocatednearapoweroutlet.

Itshouldbemountedinaneasilyaccessibleareasoit’seasytoperform
general maintenance
with the coaxial cable connections, dip switch
settingsandpoweradaptor.

Make sure all cables and antennas are securely connected before
commissioningthesystem.
2.8 Powerupyourcellularbooster
Once all the Following precautions have been taken, power on the
cellularbooster.
1. Verifythatyouhaveleftatleast20feetofverticalseparationspacebetweenthe