User Manual

silicone caulking to fully waterproof the connection.
Attach the cable in such a way that a drip loop is formed.
Once mounted, connect one end of the coaxial cable to the donor (outdoor)
antenna and the other end to the cellular booster where it is marked
“outdoor”
3.6 Install the Server (Indoor) antenna
Connect one end of the coaxial cable to the antenna and the other end to the
cellular booster where it is marked “indoor”.
Select the installation location of your supplied server (outdoor) antenna
based on the following:
Omni Ceiling directional antenna
Place in the center of the area where the signal needs to be amplified.
Panel directional antenna
Place in the outer perimeter of the area the signal needs to be amplified.
Whip Omni directional antenna
Mount directly to the connector marked “indoor” on the cellular booster.