User Manual

2. Check all connections on the cable, antennas, and booster.
3. Check cable for bends and or cuts.
4. All LED lights on the booster should be green.
5. Outdoor antenna and the indoor antennas have adequate separation and
are not causing feedback.
7 FREQUENTLY ASKED QUESTIONS
WHY ARE THE LED LIGHTS TURNING FLASHING GREEN, FLASHING
RED OR SHUTTING OFF?
There are certain cases where your system could be experiencing oscillation.
This can be attributed to either the quality of your input signal or having your
outdoor antenna and indoor antenna too close together. Please review the
following guidelines to help resolve this issue:
1. Adjust the direction of the outdoor antenna. If the system is receiving a
very high input signal, you can point your outdoor antenna away from the
cellular tower to reduce the strength of the input signal and therefore,
reduce the oscillation. Alternatively if your system is receiving a very poor
quality signal (weak and unusable signal), you can point your outdoor
antenna more directly towards the cellular tower to increase the strength
of the input signal. Sometimes this may require completely repositioning
the antenna to a location where you can achieve a line of site to the tower.
2. Increase the separation between the outdoor antenna and the indoor
antenna. This can be achieved by increasing the distance between the two